Introduction
When it comes to industrial components, precision is key. One such component that demands attention is the KD1001K-2-9-597401-00 Size, a part whose size and specifications play a crucial role in its application. Whether you’re an engineer, a procurement specialist, or a technician, understanding the exact dimensions and features of this part is essential for compatibility, performance, and efficiency.
In this article, we will explore the KD1001K-2-9-597401-00 size in detail, covering its dimensions, applications, material composition, and why accurate measurements matter. By the end, you’ll have a clear understanding of how this component fits into various systems and how to ensure you’re using the right size for your needs.
What Is the KD1001K-2-9-597401-00?
Before diving into its size, let’s briefly discuss what the KD1001K-2-9-597401-00 is. This alphanumeric code typically refers to a specific industrial part, possibly a bearing, seal, valve, or another mechanical component. The exact nature of the part depends on the manufacturer and industry standards.
For the sake of this guide, we’ll assume it is a bearing or seal component, commonly used in machinery, automotive systems, or industrial equipment. The part number KD1001K-2-9-597401-00 likely breaks down into:
- KD1001K: Series or model designation
- 2-9: Size or variant identifier
- 597401-00: Manufacturer’s internal code for material or batch
Now, let’s focus on the size specifications.
KD1001K-2-9-597401-00 Size Specifications
1. Outer Diameter (OD)
The outer diameter is a critical measurement, ensuring the part fits securely within its housing. Based on similar industrial components, the KD1001K-2-9-597401-00 likely has an OD ranging between 50mm to 100mm, but exact dimensions should be verified with the manufacturer’s datasheet.
2. Inner Diameter (ID)
The inner diameter must match the shaft or axle it fits onto. For this part, the ID could be between 25mm to 60mm, depending on the application.
3. Width/Thickness
The width (or thickness) determines how much space the component occupies. A typical range might be 10mm to 30mm, but again, exact figures depend on the part’s design.
4. Weight
Weight impacts handling and installation. If made of steel or high-density material, this part may weigh between 200g to 800g.
5. Tolerance Levels
Precision components like this often have tight tolerances (e.g., ±0.01mm) to ensure proper fit and function.
Why Size Matters for KD1001K-2-9-597401-00
Using the wrong size can lead to:
- Mechanical Failure – Improper fit causes excessive wear or breakage.
- Reduced Efficiency – Misaligned parts increase friction and energy loss.
- Safety Risks – Loose or tight fittings may lead to accidents.
Always cross-check dimensions with technical drawings or supplier specifications.
Applications of KD1001K-2-9-597401-00
This part is likely used in:
- Automotive systems (transmissions, wheel bearings)
- Industrial machinery (pumps, motors, conveyors)
- Aerospace components (landing gear, actuators)
Material & Durability
Common materials include:
- Stainless steel (corrosion-resistant)
- Carbon steel (high strength)
- Polymer composites (lightweight applications)
How to Verify the Correct Size
- Check Manufacturer Documentation – Datasheets provide exact dimensions.
- Use Precision Measuring Tools – Calipers, micrometers, and gauges ensure accuracy.
- Consult with Suppliers – Reliable vendors confirm specifications before purchase.
Conclusion
The KD1001K-2-9-597401-00 size is a vital factor in its performance and longevity. By understanding its dimensions, applications, and material properties, you can ensure optimal functionality in your machinery. Always verify measurements with official sources to avoid costly errors.